Select Page

SteelForm™ S-24C

Sectional Ribbed Doors

A simple solution for typical commercial and industrial door applications, the SteelForm S-24C commercial sectional ribbed door provides Raynor quality and durability in a limited selection of sizes, features, and options.

S-24C Features & Options

Raynor SteelForm S-24C sectional ribbed commercial doors are available with numerous features and options, including those listed below.

Durable Construction

Constructed with stainless steel rivets and roll-formed tongue-in-groove meeting rails for maximum structural integrity, S-16, S-20, S-24, and S-24C doors are built to withstand heavy use.

Rugged Hardware and Springs

Your SteelForm door comes packaged with the right combination of hardware, track, and springs to precisely match your door’s size and application and provides years of reliable service.

Decreased Energy Costs

SteelForm doors help you reduce energy costs with a U-shaped, vinyl bottom weatherseal secured by a sturdy aluminum retainer.

Header Seal

Flexible, EPDM rubber flap header seal on S-16, S-20, S-24, and S-24C reduces air infiltration and energy costs by sealing the top of the door against the header.

Jamb Seal

Jamb seal also helps to reduce air infiltration and decrease energy costs by sealing the side of the door when closed. Available in EPDM rubber or flexible vinyl flap.

Section Joint Seal

SteelForm doors are available with a neoprene foam rubber section joint seal to help prevent airflow between sections.

Insulation

Doors are available with energy-saving insulation. Choose from white impact-resistant (shown) or steel (26, 24 or 20-gauge) back covers.

Secure Locks

In applications where control and access are important, choose from a variety of locking options to help keep your building secure. Locks come in both inside and outside variations.

EnduraCote™

The EnduraCote hardware system comes with springs, track, and hardware that are powder coated to provide a clean, finished look and maximum protection against rust.

Choice of Windows

Select either 24″ x 8″ or fullview window sections. Choose from a variety of glass, insulated glass, acrylic and polycarbonate styles to suit any application.

Removable Center Posts

Carry-away, swing-up options available for extra-wide openings. Ideal for agricultural or airplane hangar applications.

Customized Track and Hardware

Track systems are supplied to fit special clearances, inclines or contour applications. Hardware and track systems can be designed to fit any need. Additional trussing is available for special wind loading applications. A QuikClip™ pre-assembled track option is also available.

Carbon Monoxide Vent

Allows you to channel fumes to the outside when the SteelForm S-16 door is closed. Available in a variety of sizes.

High-cycle Counterbalance System

For reliable operation in high traffic areas, choose high-cycle torsion springs with 25,000; 50,000 or 100,000 cycle life. For reduced maintenance and ultra-smooth operation in heavy-use applications, choose a weight counterbalance system.

Colors

The Raynor SteelForm S-24C commercial door is available in White.

Optional Post Paint Process

ColorWave

Raynor’s ColorWave™ features Sherwin-Williams® next generation post paint system for your garage door. With 1,500 colors to choose from, home and business owners can couple this elite paint system with state of the art Raynor manufacturing to craft the perfect look for their home or project.

Product Details

Door
Type Commercial Sectional Garage Doors
Model SteelForm S-24C
Size 20′ x 16′ Max
Operation Manual, Motor or Hand Chain
IECC Thermal Performance N/A
Sections
Construction 1 or 2-Layer Pan
Material Steel
Surface Texture Smooth Ribbed
Section Joint Tongue-in-Groove
Section Thickness 2″
Gauge Steel; Exterior: 24-Gauge Nominal
Stiles End Stiles: 16-Gauge; Center Stiles: 16-Gauge
Insulation Optional Expanded Polystyrene with Impact-Resistant Covers (7.7 R-value)
Seals Bottom Seal (3″, 4″ EPDM, or 3″ Yellow); Optional Header Seal
Trussing Wind Load: 20 P.S.F. Tested/13.3 P.S.F. Design Load (standard); Material: U-bar (18-Gauge or 20-Gauge)
Panel Configuration NA
Color White. Raynor’s ColorWave™ with 1,500 Sherwin-Williams® colors.
Windows 24″ x 8″ or fullview section; glass: choose from a variety of standard or insulated glass, acrylic, and polycarbonate styles to suit any application
Track
Type Normal Headroom, Rear Mount Low Headroom, Front Mount Low Headroom, Lift Clearance, Vertical Lift, Incline, Contour, and QuikClip™ Pre-Assembled Track Options
Finish Galvanized
Size 2″ or 3″
Gauge 13, 16-Gauge
Counterbalance System
Type Torsion Spring
Springs Spring Inner Diameter: 2-1/4″, 3-1/2″ or 5-1/2″;
Shafts Tube or Solid (D-Shaft, 1″ Keyed)
Hardware/Accessories
Hinges 11, 13, 14-Gauge or Hybrid
Rollers Standard (2″) or Heavy Duty (2″)
Finish Galvanized
Lock Interior Slide Lock or Exterior Lock Bars
Seal(s) Jamb Seal
Hanger Angle 11, 13-Gauge Galvanized
Pedestrian Door N/A
Optional Wind Loading Certified Wind Load Available
Posts N/A

Specifications

Word Document PDF document
Raynor Quick Spec Microsoft Word Document PDF Document
CSI Master Format Microsoft Word Document PDF Document

Standard Drawings

2-inch Track/Bracket-Mounted
Normal Headroom DWG Drawing PDF Document
Lift Clearance DWG Drawing PDF Document
Vertical Lift DWG Drawing PDF Document
Low Headroom Front-Mount DWG Drawing PDF Document
Low Headroom Rear-Mount DWG Drawing PDF Document
2-inch Track/Angle-Mounted
Normal Headroom DWG Drawing PDF Document
Lift Clearance DWG Drawing PDF Document
Vertical Lift DWG Drawing PDF Document
Low Headroom Front-Mount DWG Drawing PDF Document
Low Headroom Rear-Mount DWG Drawing PDF Document
3-inch Track/Angle-Mounted
Normal Headroom DWG Drawing PDF Document
Lift Clearance DWG Drawing PDF Document
Vertical Lift DWG Drawing PDF Document
Low Headroom Front-Mount DWG Drawing PDF Document
Low Headroom Rear-Mount DWG Drawing PDF Document

Technical Information

Section and Panel Schedules

 Door Width  Number of Raised Panels  Door Height  Number of Sections
Up to 9′ 2″ 2 Up to 8′ 2″ 4
9′ 3″ – 12′ 2″ 3 8′ 3″ – 10′ 2″ 5
12′ 3″ – 16′ 2″ 4 10′ 3″ – 12′ 2″ 6
12′ 3″ – 14′ 2″ 7
14′ 3″ – 16′ 1″ 8

Product Literature

SteelForm “S” Series Warranty

DOOR SECTIONS

Raynor® warrants the door sections against defects in material and workmanship, and deterioration due to rust-through for ten (10) years from date of delivery to the original purchaser. Window components are warranted against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

HARDWARE and SPRINGS

Raynor warrants all hardware and spring components against defects in material and workmanship for one (1) year from date of delivery to the original purchaser.

ColorWave™ Post Paint Process

Raynor warrants the ColorWave post paint process (exterior only) against chipping, cracking, and/or peeling (losing adhesion), for a period of (5) five years from the date of delivery to the original purchaser. Fading and chipping, cracking, or peeling caused by dents or scratches is not covered under this warranty.

WARRANTY LIMITATIONS and EXCLUSIONS

Under the terms of this limited warranty, for any door components that are found to be defective upon inspection by authorized Raynor personnel, Raynor will, at its option, repair or replace the defective door components. Labor charges for the installation or repairs shall be the responsibility of the consumer and must be performed by a qualified installer. This warranty applies only to doors that are professionally installed by a qualified installer.

This warranty extends only to the original purchaser, provided the door is installed in his/her place of business. This warranty is not transferable.

This warranty does not apply to any damage or deterioration to the door caused by abuse, negligence, missing components, accidents, use of pressure washers, dents or scratches. Shavings from trolley rails not properly removed and cleaned from the exterior door surface causing rust are not covered by this warranty. Failure to provide proper maintenance voids this warranty. Field applied paint failure is not covered by this warranty. Refer to the Care and Maintenance Instructions and Painting Instructions.

This warranty does not apply to damage caused by fire, an act of God, accident, vandalism or graffiti. Damage or deterioration caused by saltwater coastal areas (within two miles), hazardous or corrosive chemicals and fumes including, but not limited to, alkaline, acids, muriatic acids, road salt or salt environments, harsh cleaning agents, and fertilizers is not covered by this warranty.

Raynor shall not be liable for any consequential or incidental damages.

ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANT OF MERCHANTABILITY, ARE HEREBY EXPRESSLY EXCLUDED.

Some states do not allow the exclusion or limitation of consequential or incidental damages, so the above limitation or exclusion may not apply to you.

Claims for defects in material and workmanship covered by this warranty shall be made in writing with proof of purchase and photographs of the product in question to the dealer from whom the product was purchased or call Raynor at 1-800-4-RAYNOR within the warranty period. Raynor may choose to have the product returned for inspection.

This warranty gives you specific legal rights. You may also have other rights, which may vary from state to state.